Test your click speed in 1 second
The test length is set to 1 second. Click the pad, and the clock starts on your first click.
- Runs on your device
- No sign-up
- Works offline after a visit
Click the pad to start the clock.
Mouse, trackpad, touch and pen clicks count. Keyboard keys do not: this test needs a pointer or a finger.
Your result appears here when the time is up.
This page sets the click test to 1 second. The clock starts on your first click, and that click counts. Mouse, trackpad, touch and pen clicks all count. Keyboard keys do not, so pressing Enter or Space on the pad adds nothing.
A one second test measures a single burst, not a sustained pace, so it usually gives a higher figure than a longer test. The chart counts your clicks in each 100 ms, which shows when the burst was strongest. For a result over a longer stretch, try the 10 second click test.
How to test your click speed
- Pick a test length: 1, 5, 10, 30 or 60 seconds.
- Click the pad. The clock starts on your first click, and that click counts.
- When the time is up, read your clicks per second. Then try again to beat it.
Questions
What does the chart show in a 1 second test?
It counts the clicks in each 100 ms, so the bars show how the burst built up and faded inside the second. The shortest gap between two clicks is shown too.
Is a 1 second result a good score?
The page does not rate your result or compare it with anyone else. It shows the clicks per second for the run you made, and keeps your best 1 second run for this visit only. Compare runs at the same length.
What is CPS?
CPS means clicks per second. The test divides the clicks you made by the length of the test, so 40 clicks in 10 seconds is 4.00 CPS.
Why do short tests score higher than long ones?
A burst is easier to hold for one second than for sixty. Over a long test the hand tires and the rhythm slows, so the average falls. Compare results at the same length.
What limits how fast I can click?
Mostly the hand and finger. The switch matters too: it has to travel and reset, and the mouse firmware filters out contact bounce, which is called debounce. A worn switch can sometimes register one press twice, and the mouse test on this site can help you check that.
Is anything recorded?
No. The count lives in this page and is gone when you close it. Nothing is uploaded or stored. The test length you pick is remembered on this device.
Reviews
No reviews yet. Be the first.